Putting the MKE 600 into operation
The MKE 600 offers a choice of phantom powering via the XLR connection or
internal battery powering.
P48 phantom powering via XLR connection
f Connect the XLR-3 socket (female) of the microphone cable to the XLR-3
socket (male) of the microphone 8.
f Connect the connector of the microphone cable to the video camera/cam-
corder or recording device. The LED
LED
grün
If phantom powered via the XLR connection, the microphone is conti-
nuously in operation (the
Internal battery powering
f Unscrew the lower part of the microphone body
tion of the arrow.
f Insert a battery/rechargeable battery (AA size, 1.5 V/1.2 V). Observe correct
polarity when inserting the battery.
f Screw the lower part of the microphone body
turning it in the direction of the arrow.
5
P48 phantom powering
switched on; the microphone is operational
BATT ON/OFF
3
provides the following information:
battery switch has no function).
5
by turning it in the direc-
5
back to the microphone by
5
MKE 600