Component Specifications - Klipsch LF-10 Owner's Manual & Warranty

Component Specifications
LF-12
Type: Bass reflex enclosure via dual passive radiators
Amplifier: Maximum Output Power-2000 watts
FTC Rated Power-1000 watts into 7 ohms,
22-100Hz @ 1% THD
Auto Power On: 2 second ON delay, 15 minute OFF delay
Frequency Response: 16-100Hz ±3dB
Maximum Acoustic Output: 123dB
Low Pass Crossover: Continuously variable from 40-120Hz,
36dB/octave slope above 120Hz.
Inputs: 2) Line level RCA phono jacks 1) Line Level Dedicated
LFE channel input (nonfiltered) 2) High level speaker
terminals
Outputs: 2) Line level RCA phono jacks with switchable high
pass filter between 50 and 100Hz, 6dB/octave slope
2) High level speaker terminals with fixed high pass at
100Hz, 6dB/octave slope
Phase: Switchable 0-180 degrees
Drive Components: 1) K-1074-K 12" (30.5cm) driver
2) KD-123-K 12" (30.5cm) passive radiators
Net Weight: 61 lbs. (27.7kg)
Height: 16.2" (41.15cm)
Width: 15.6" (39.69cm)
Depth: 17.37" (44.12cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Matte-finish black vinyl
Voltage: 110/120 VAC 60 Hz - Export Version 230
VAC 50/60 Hz
Klipsch Limited Warranty
KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (subject to the terms
set forth below). For a period of five (5) years from the date of purchase, KLIPSCH will repair or replace (at KLIPSCH's option)
this product or any defective parts (excluding electronics and amplifiers) in this product. For products that have electronics or
amplifiers, the warranty on those parts is for a period of two (2) years from the date of purchase.
To obtain warranty service, please contact the KLIPSCH authorized dealer from which you purchased this product. If your dealer
is not equipped to perform the repair of your KLIPSCH product, it can be returned, freight paid, to KLIPSCH for repair. Please
call KLIPSCH at 1-800-KLIPSCH for instructions. You will need to ship this product in either its original packaging or packaging
affording an equal degree of protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the warranty
period, must be presented to obtain warranty service.
This Warranty is invalid if (a) the factory applied serial number has been altered or removed from this product or (b) this product
was not purchased from a KLIPSCH authorized dealer. You may call 1-800-KLIPSCH to confirm that you have an unaltered serial
number and/or you purchased from a KLIPSCH authorized dealer.
This Warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial
use, or modification of, or to any part of, the product. This Warranty does not cover damage due to improper operation, mainte-
nance or installation, or attempted repair by anyone other than KLIPSCH or a KLIPSCH dealer which is authorized to do
KLIPSCH warranty work. Any unauthorized repairs will void this Warranty. This Warranty does not cover products sold AS IS
or WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE
CONSUMER. KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED
BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES
WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR
A PRACTICAL PURPOSE.
Some states do not allow the exclusion or limitation of incidental or consequential damages or implied warranties so the above
exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from
state to state.
This product complies with the essential requirements of EMC directives 89/336/EEC and 73/23/EEC (inclusive of
93/68/EEC) and carries the CE mark accordingly.
/ space 1 meter
1
8
LF-10
Type: Bass reflex enclosure via dual passive radiators
Amplifier: Maximum Output Power-1000 watts
FTC Rated Power - 500 watts continuous into 10 ohms,
22-100Hz @ 1% THD
Auto Power On: 2 second ON delay, 15 minute OFF delay
Frequency Response: 19-100Hz ±3dB
Maximum Acoustic Output: 120dB
Low Pass Crossover: Continuously variable from 40-120Hz,
36dB/octave slope above 120Hz
Inputs: 2) Line level RCA phono jacks 1) Line Level Dedicated
LFE channel input (nonfiltered) 2) High level speaker
terminals
Outputs: 2) Line level RCA phono jacks with switchable high
pass filter between 50 and 100Hz, 6dB/octave slope
2) High level speaker terminals with fixed high pass at
100Hz, 6dB/octave slope
Phase: Switchable 0-180 degrees
Drive Components: K-1073-K 10" (25.4cm) driver
2) KD-104-K 10" (25.4cm) passive radiators
Net Weight: 49 lbs. (22.25kg)
Height: 14.2" (36.07cm)
Width: 13.6" (34.54cm)
Depth: 15.4" (39.12cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Matte-finish black vinyl
Voltage: 110/120 VAC 60Hz - Export Version 230
VAC 50/60Hz
1 / space 1 meter
8