Component Specifications - Klipsch KSW-10 Owner's Manual & Warranty

Component Specifications
KSW 15
Type: 15" bass reflex, tuned port enclosure
Amplifier: Peak output power 800 watts into 16 ohms
FTC Rated Power: 265 watts into 16 ohms 22-100Hz
@ 1% THD maximum
Auto Power On: 2 second ON delay, 15 minute OFF delay
Frequency Response: 24-120Hz±3dB
Maximum Acoustic Output: 121dB
Low Pass Crossover: Continuously variable from 40-120Hz,
24dB/octave slope above 120Hz
Inputs: 2) Line level RCA phono jacks 1) Line level
dedicated LFE channel input (non-filtered) 2) High
level speaker terminals
Outputs: 2) Line level RCA phono jacks with switchable
high pass filter between 50 and 100Hz 2) High level
speaker terminals with fixed high pass at 100Hz,
6dB/octave slope
Phase: Switchable 0-180 degrees
Drive Component: K-1072-K 15" (38.1cm) driver
Net Weight: 45 lbs. (20.45kg)
Height: 19.5" (49.53cm)
Width: 17.5" (44.45cm)
Depth: 17.5" (44.45cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Matte finish black vinyl
Voltage: 110/120 VAC 60Hz - Export Version 230
VAC 50/60Hz
KSW 12
Type: 12" bass reflex, tuned port enclosure
Amplifier: Peak output power 441 watts into 4 ohms
FTC Rated Power: 105 watts continuous into 4 ohms,
22-100Hz @ 1% THD m a x i m u m
Auto Power On: 2 second ON delay, 15 minute OFF delay
Frequency Response: 26-120Hz±3dB
Maximum Acoustic Output: 113dB
Low Pass Crossover: Continuously variable from 40-120Hz,
24dB/octave slope above 120Hz
Inputs: 2) Line level RCA phono jacks, 2) High level speaker
terminals
Outputs: 2) High level speaker terminals, High pass filtered
at 100Hz, 6dB/octave slope
Phase: Switchable 0-180 degrees
Drive Component: K-1071-K 12" (30.5cm) driver
Net Weight: 35 lbs. (15.9kg)
Height: 17" (43.18cm)
Width: 15" (38.1cm)
Depth: 15" (38.1cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Matte finish black vinyl
Voltage: 110/120 VAC 60 Hz - Export Version 230
VAC 50/60Hz
1 / space 1 meter
8
1 / space 1 meter
8
KSW 10
Type: 10" bass reflex, tuned port enclosure
Amplifier: Peak output power 225 watts into 4 ohms
FTC Rated Power: 55 watts continuous, 22-125Hz
@ 1% THD m a x i m u m
Auto Power On: 2 second ON delay, 15 minute OFF delay
Frequency Response: 29-120Hz±3dB
Maximum Acoustic Output: 110dB
Low Pass Crossover: Continuously variable from 40-120Hz,
24dB/octave slope above 120Hz
Inputs: 2) Line level RCA phono jacks 2) High level speaker
terminals
Phase: Switchable 0-180 degrees
Drive Component: K-1070-K 10" (25.4cm) driver
Net Weight: 29 lbs. (13.18kg)
Height: 15.5" (39.37cm)
Width: 13.5" (34.3cm)
Depth: 13.5" (34.3cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Matte finish black vinyl
Voltage: 110/120 VAC 60Hz - Export Version 230
VAC 50/60Hz
1 / space 1 meter
8