Table of Contents
Advertisement
IMPORTANT INFORMATION
Dear Parents and Supervising Adults,
Children want to explore, understand, and create new things.
They want to try things and do it by themselves. They want to gain knowledge!
They can do all of this with Thames & Kosmos experiment kits.
With every single experiment, they grow smarter and more knowledgeable.
Before building and experimenting, read the
instructions together with your child and
discuss the safety instructions.
Support your child with advice and a helping
hand, especially during tricky assembly steps
or experiments.
To prevent damage to the work surface on
which your child is building and experimenting,
provide them with a mat or other surface
protection. When experimenting with water, it
is a good idea to have some paper towels ready
to wipe up spills.
When cutting the plastic parts out of the
frames with the diagonal cutter or scissors,
special care must be taken, not just because of
the sharp edges on the tools, but also because
the plastic parts can yield sharp edges or
burrs. These can be removed with the help of
the diagonal cutter or a nail file. Supervise your
child when they are using the sharp tools until
you trust that they can handle the tools
independently.
ASSEMBLY AND DISASSEMBLY
Some components are needed for all of the
models, but some are only needed for one or
two models. If your child wants to build a new
model, help ensure that no parts get lost
during disassembly by providing a container to
collect parts.
When disassembling, most parts can be easily
taken apart by hand.
However, some parts may be too tight to pull
out by hand. Help your child by inserting the
special part D28 as described on page 7.
We hope you and your child have a lot of fun
building and playing with the WindBots.
WindBots
3
Advertisement
Table of Contents
