Pushbutton sensor 4 Komfort Rear view (Figure 2) Figure 2: Device components - rear side Device connection terminal for remote sensor Locking screws Opening for removing the KNX connection terminal with screwdriver Device connection terminal KNX System information This device is a product of the KNX system and complies with the KNX directives. Detailed tech- nical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
Pushbutton sensor 4 Komfort – Integrated bus coupling unit Operation Depending on the programming, a control rocker can have up to two functions assigned to it (left, right). Operation is carried out by short or long pressing the buttons and depends on the specific function.
Pushbutton sensor 4 Komfort Programming button Push-button sensor Box screws The device should be used in an air-tight appliance box. Otherwise temperature and hu- midity reading can be negatively influenced by draughts. ■ Mount supporting frame (h) in the right orientation on an appliance box. Note the TOP marking.
Page 5
-5 ... +45 °C Storage/transport temperature -20 ... +70 °C Accessories Individually labelled rocker sets are available from the Gira inscription service www.bes- chriftung.gira.de. Rocker set, 1-gang for pushbutton sensor 4 Order no. 5021 .. Rocker set, 1-gang, inscribable, for pushbutton sensor 4 Order no.