Table of Contents
Advertisement
PAGE HEADER.....
ASSEMBLING YOUR BREVILLE PRODUCT
7.
Place the juice jug provided sideways
under the spout of the juicer. A graphic
on the lid shows where the juicer spout
is to be placed. Note the jug is designed
to clip in under the spout to give it a
positive location.
NOTE
A glass could also be used to collect
the juice, but using the jug and lid is
recommended to avoid any splatter.
WARNING
Never use fingers to push food down
the feed chute or to clear the feed
chute.
Always use the food pusher provided.
1.
Wash your selection of fruit and
vegetables ready for juicing.
2.
Ensure the juicer is correctly assembled.
Ensure the stainless steel filter is
thoroughly cleaned before each use
(refer to care and cleaning). Ensure you
place the juice jug with lid fitted (or
glass) under spout before commencing
juicing.
3.
Plug the power cord into a 230/240V
power outlet and turn the power on.
Push the ON/OFF button to on.
4.
With the motor running, place food into
the feed chute. Using the food pusher,
gently guide food down the feed chute.
NOTE
Always ensure the power is turned on
before inserting fruits and vegetables .
Using a gentle pushing motion using
the pusher will extract the maximum
amount of juice.
5.
Juice will flow into the juice jug and the
separated pulp will accumulate in the
integrated pulp container.
NOTE
When the integrated pulp container is
full of pulp, it must be emptied before
continuing to juice.
(Refer to disassembling instructions).
Reassemble machine to continue
juicing.
7
Advertisement
Table of Contents
