Securing The Flat Panel To The Wall Mount; Lateral Shift Adjustment - Sony SFM1 Installation Manual

Securing the Flat Panel to the Wall Mount

WARNING: At least (2) qualified personnel are strongly recommended for installation of this product. Failure
to do so could result in serious injury and possible damage to the flat panel.
1. Raise the flat panel with the LEFT and RIGHT mounting brackets secured to the flat panel and insert the
top hooks from each bracket to the rod on the wall plate (Figure 13).

Lateral Shift Adjustment

1. Make any lateral shift adjustment and lock it by tightening the two (2) ¼"-20 Phillips screws found on the
bottom of the mounting brackets (Figure 14).
2. Use the foot leveler to adjust your plasma.
CAUTION: Do not over tighten the ¼"-20 screws to the rods.
¼ - 20" Screw
Installation Manual
Great user manuals database on
Figure 13. Securing The Flat Panel
Lateral Shift
Figure 14. Lateral Shift Adjustment
UserManuals.info
Wall Plate
SFM1
TOP
BOTTOM
Leveling Foot
Page - 13 -