Possible Causes Of Interference - Klipsch LightSpeaker 5.2.0 Owner's Manual

Tech Support: 1-800-KLIPSCH
Possible causes of interference with your LightSpeaker 5
®
A) Metal studs, in fact any metal wall material, can cause
the signal to be diminished or lost. This may also be a
problem if your wall paper happens to be a foil type or
have metal fibers in it.
B) Microwave ovens, when operating, may degrade or
interrupt the signal from your transmitter. Usually this will
only be a problem for those speakers in close proximity
to the microwave. For best results, do not locate the
transmitter near your microwave.
C) Certain portable phones operating in the 2.4
Ghz range, wireless computer routers, and other
consumer electronics and toys using 2.4 Ghz may cause
interference when operated too close to either the
transmitter or the speakers.
20