Klipsch LightSpeaker 5.2.0 Owner's Manual page 18

LED Light
• 10W super bright LED provides a sharp crisp light
that is easy on the eyes.
• LED outputs the light suitable to replace up to a
60W incandescent bulb
• Long Lasting LED is rated for over 25,000 to
40,000 hours of use (15 to 20 years average use)
• LED Light is fully dimmable and is controlled
from either the remote or the light button on the
transmitter
Wireless Transmitter
Receives a 2.4 GHz wireless stereo signal broadcast
from the Transmitter and depending on the zone
assigned to the speaker and the left or right audio
channel selected, the receiver sends the correct signal
to each LightSpeakers
Digital Amplifier & Switch Mode Power Supply
• The E26 standard Edison Screw allows the unit to
attach to any standard light fixture socket.
• The high efficiency switch mode power supply
delivers power to the LED and the digital
amplifier without generating a lot of heat.
• 20W high performance low distortion digital
amplifier provides energy efficient sound
• The on-board Digital Signal Processing delivers
customized audio to each LightSpeaker
speaker sound in a small speaker.
18
Tech Support: 1-800-KLIPSCH
on-board digital amplifier.
®
giving big
®