Advertisement
OPERATING INSTRUCTIONS
• Connect the power cable to a 220-240V, 13 amp supply
that is located in a safe, dry area.
• The heater must be properly installed before it is used.
• Only operate the heater when it is in the upright position.
• This unit is equipped with three heat settings.
Push the On/Off switch to the "I" position to activate
●
the heater.
Touch the touch switch once to operate the heater on
●
low power (900W).
Touch the touch switch twice to operate the heater on
●
medium power (1200W).
Touch the touch switch three times to operate the
●
heater on high power (2100W).
Touch the touch switch four times to shut the heater
●
off.
To completely turn off the patio heater, push the On/Off
●
switch to the "O" position.
18
Revision 1.3
Advertisement
