Table of Contents
Advertisement
Various forms of accessories for DINCO CLASSIC exist, e.g. crumblers and side discs.
Other accessories are lights and seeddrills.
Crumbler
The crumbler is mounted behind the rear roller and gives an extra working of the field.
The crumbler is designed as a roller with a smaller diameter than the rear roller, which
means a faster rotation and thereby a more effective crushing of clods. At the same
time the crumbler packs the topsoil to preserve the moistness of the soil.
Mounting of accessories
Depending on the type of rear roller (cage roller or t-rings) two different bearings for
the crumbler exists.
Fig. 7
T-rings
The crumbler for the t-ring roller is mounted with 4 16x50 mm. bolts, which are fitted
in the flanges (A, fig. 7) at the very back of the bearings for the rear roller. The
adjustment bolts (A, fig. 8) should be screwed in completely to facilitate the
mounting. Fine adjustment of the crumbler is done on the basis that the adjustment
bolts have been screwed in completely.
Fig. 8
Cage roller
As cage rollers come with no scrapers, bracket (B, fig. 8) should be mounted before
the crumbler can be mounted.
1. Mount the adjustment bolt (A) and screw it all the way in.
2. Mount the rotation stand (C, fig. 8) on the bearing (B, fig. 8), please remember
DINCO CLASSIC
Accessories
A
C
the washer and split pin.
A
D
B
Page 15
Advertisement
Table of Contents
