ABB RELION 630 Series Product Manual page 39
Power management pml630/compact load-shedding solution
Hide thumbs
Also See for RELION 630 Series:
- Technical manual (380 pages) ,
- Communication protocol manual (304 pages) ,
- Engineering manual (156 pages)
Table of Contents
Advertisement
Power Management
PML630/Compact Load-Shedding Solution
Product version: 1.2.1
Table 36. Device order codes
Type
REF630
REG630
REM630
RET630
REF620
REM620
RET620
REF615
REG615
REM615
RET615
RIO600 (generator feeder)
RIO600 (grid transformer feeder)
RIO600 (network circuit breaker feeder)
RIO600 (load feeder)
COM600S or COM600F
The positions that are not specifically
mentioned in the above table can be
selected as per the project requirements.
ABB
Order code
Any combination is compatible; last (18th digit) cannot be A.
Any combination is compatible.
Any combination is compatible; last (18th digit) cannot be A.
Any combination is compatible; last (18th digit) cannot be A.
Any combination is compatible; 9th and 10th digits cannot be AN, BN, NN. 11th digit cannnot be B, D,
E and 18th digit has to be XF.
Any combination is compatible; 9th and 10th digits cannot be AN, BN, NN. 11th digit cannnot be B, D,
E and 18th digit has to be XF.
Any combination is compatible; 9th and 10th digits cannot be AN, BN, NN. 11th digit cannnot be B, D,
E and 18th digit has to be XF.
Any combination is compatible; 9th and 10th digits cannot be AN, BN, NN. 11th digit cannnot be B, D,
E and 18th digit cannot be C.
Any combination is compatible; 9th and 10th digits cannot be AN, BN, NN. 11th digit cannot be B,D,E.
Any combination is compatible; 9th and 10th digits cannot be AN, BN, NN. 11th digit cannnot be B, D,
E and 18th digit cannot be C.
Any combination is compatible; 9th and 10th digits cannot be AN, BN, NN. 11th digit cannnot be B, D,
E and 18th digit cannot be C.
Position 1: RTD4 (MOD600ARTD4), Position 2: DIM8 (MOD600ADIM8H)
Configuration code (AB-LACCAADDA or AA-LACCBADDA)
Position 1: RTD4 (MOD600ARTD4), Position 2: DIM8 (MOD600ADIM8H)
Configuration code (AB-LACCAADDA or AA-LACCBADDA)
Position 1: RTD4 (MOD600ARTD4), Position 2: DIM8 (MOD600ADIM8H)
Configuration code (AB-LACCAADDA or AA-LACCBADDA)
Position 1: RTD4 (MOD600ARTD4), Position 2: DIM8 (MOD600ADIM8H), Position 3: DOM4
(MOD600ADOM4R) or SCM8H/L: MOD600ASCM8H/MOD600ASCM8L
9th digit cannot be S, N (R mandatory).
14th digit cannot be N (P is recommended when manual load-shedding is opted for; G is recommended
to monitor IEC 61850 GOOSE traffic).
12th digit should be mandatory E or later.
1MRS757334 E
39
Advertisement
Table of Contents
