Sony HCD-SHAKE33 Service Manual page 5

NOTE OF REPLACING THE IC001, IC002, IC106,
IC302 AND IC306 ON THE MOTHERBOARD BOARD
IC001, IC002, IC106, IC302 and IC306 on the MOTHERBOARD
board cannot exchange with single. When these parts on the
MOTHERBOARD board are damaged, exchange the entire
mounted board.
NOTE OF REPLACEMENT OF THE MS-476 BOARD
When the MS-476 board is defective, exchange the entire
LOADING COMPLETE ASSY (T).
RELEASING THE DISC TRAY LOCK
The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Releasing Procedure:
\/1
1. Press [ ] button to turn the power on.
2. Press the [CD] button to select CD function.
x
3. Press the [ ] button and [n/
hold down for around 5 seconds.
4. The message "UNLOCKED" is displayed and the disc tray is
unlocked.
Note: When " "
LOCKED is displayed, the slot lock is not released by
turning power on/off with the
NOTE OF DISASSEMBLE THE CASE, OVERALL
To disassemble the CASE, OVERALL, hexagon key is required to
unscrew the SCREW, TAPPING (HEX).
hexagon key
+] button simultaneously and
\/1
[ ]
button.
hexagon key
HCD-SHAKE33/SHAKE77
NOTE OF REPLACING MOTHERBOARD BOARD OR
BLUETOOTH MODULE OR RC-S801/A (WW) BOARD
When the MOTHERBOARD board or BLUETOOTH module or
RC-S801/A (WW) board are replaced, please execute the below
service mode.
Pairing this system with a Bluetooth device
\/1
1. Press the [ ] button to turn the power on.
2. Place the Bluetooth device within 1 meter (3 feet) from the
system.
3. Press BLUETOOTH on the unit to select Bluetooth function.
"BLUETOOTH" appears in the display panel.
4. Hold down BLUETOOTH on the unit for 2 seconds or more.
"PAIRING" fl ashes in the display panel.
5. Perform the pairing procedure on the Bluetooth device.
6. Select the model number of the unit on the display of the
Bluetooth device.
For example, select "SONY : SHAKE-77/SHAKE-33". If
passkey is required on the Bluetooth device, enter "0000".
7. Perform the Bluetooth connection on the Bluetooth device.
8. When pairing is completed and the Bluetooth connection is
established, the Bluetooth device name appears in the display
panel.
9. To cancel pairing operation, hold down BLUETOOTH on the
unit for 2 seconds or more until "BLUETOOTH" appears in
the display panel.
Connecting with a smartphone by one touch (NFC)
Note: The operation in this mode must use a NFC-compatible smartphone
(Smartphones with a built-in NFC function [OS: Android 2.3.3 or
later, excluding Android 3.x])
\/1
1. Press the [ ] button to turn the power on.
2. Download and install the app "NFC Easy Connect".
Download the free Android app from Google Play by searching
for "NFC Easy Connect".
3. Start the app "NFC Easy Connect" on the smartphone.
Make sure that the application screen is displayed.
4. Touch the smartphone to the N-Mark on the system until the
smartphone vibrates.
Complete the connection by following the instructions
displayed on the smartphone.
5. When pairing is completed and the Bluetooth connection is
established, the Bluetooth device name appears in the display
panel.
5