Sound1; Options - Hitachi 32LD8700C Service Manual

Sharpness
Colour
R
G
B
Backlight
In this menu preset values for each Mode (Contrast, Brightness, Sharpness, Colour values for each
Mode-NATURAL, DYNAMIC, CINEMA) and for each Colour Temp. (R, G, B values for each Colour
Temp- COOL, NORMAL, WARM) are determined for each source.
12.2.

SOUND1

Menu Subwoofe
visible in sound menu, else Subwoofer is not available.
Subwoofer Level (dB)
Subwoofer Corner Freq. (x10Hz) => Last low frequency value that is amplified. 5...40
Menu Equalizer
Menu Headphone
Menu Effect
Menu Wide Sound
Menu Dynamic Bass
Menu Virtual Dolby
Carrier Mute
else not.
Virtual Dolby Text
seen in sound menu as 3D PANORAMA or VIRTUAL DOLBY.
12.3.
SOUND 2
AVL
Menu AVL
from sound menu by normal user, else AVL is invisible to normal user.
FM PRESCALE AVL ON
value for the related standard. 0...127
NICAM PRESCALE AVL ON
value for the related standard. 0...127
SCART PRESCALE AVL ON
value for scart outputs. 0...127
SCART VOLUME AVL ON
value for scart1 and scart2. 0...127
FM PRESCALE AVL OFF
value for the related standard. 0...127
NICAM PRESCALE AVL OFF
value for the related standard. 0...127
SCART PRESCALE AVL OFF
value for scart outputs. 0...127
SCART VOLUME AVL OFF
value for scart1 and scart2. 0...127
12.4.

Options

Burn-In Mode
sequence until Menu button is pressed.
FIRST APS
with the factory default settings.
APS Volume
value.
AGC (dB)
Power-Up Mode
TFT TV Service Manual
=> Slider Bar. Changing value between 0 to 31.
=> Slider Bar. Changing value between 0 to 99.
=> Slider Bar. Changing value between 0 to 31.
=> Slider Bar. Changing value between 0 to 31.
=> Slider Bar. Changing value between 0 to 31.
=> Slider Bar. Changing value between 0 to 255.
=> If ON, Subwoofer option is available in TV set, and the item is
=> This value is gain value of Subwoofer output in dB. -30...12
=> If ON, visible in sound menu, else invisible.
=> If ON, visible in sound menu, else invisible.
=> If ON, visible in sound menu, else invisible.
=> If ON, visible in sound menu, else invisible.
=> If ON, visible in sound menu, else invisible.
=> If ON, visible in sound menu, else invisible.
=> If ON, in the absence of an FM carrier the output is muted,
=> Active if VIRTUAL DOLBY is ON. According to the selection;
=> AVL is controlled from this menu by service user. ON/OFF
=> If ON, AVL item is visible in sound menu, and AVL can be controlled
=> If AVL ON, set value in this item is used as prescale
=> If AVL ON, set value in this item is used as prescale
=> If AVL ON, set value in this item is used as prescale
=> If AVL ON, set value in this item is used as volume
=> If AVL OFF, set value in this item is used as prescale
=> If AVL OFF, set value in this item is used as prescale
=> If AVL OFF, set value in this item is used as prescale
=> If AVL OFF, set value in this item is used as volume
=> If ON, When TV is powered ON Green, Blue, Red is displayed in
=> If ON, "First APS" menu is displayed when the TV is switched on
=> After First APS function finishes, the volume of the TV is that
=> Tuner AGC value.
=> Mode defines the TV set power on state.
Stand-by : When TV is ON set is in stand-by mode
Normal : When TV is ON set is in normal mode
Last State: When TV is ON set is in Last State mode
34