Advertisement
Quick Links
Induro
Mortice Lock
TM
Palladium Furniture, 2-Point
Installation Instructions
Application:
Provides secure deadlocking for aluminium hinged
doors. Palladium Xtra furniture available with daylatch snib.
Pack Contents:
2-Point Lock
(30mm Backset Shown)
M4 Furniture fixing screws
M5 Cylinder fixing screw
8g x 7.5 Screws
Screw Selection:
Screw
M4 x 49mm
M4 x 55mm
M4 x 60mm
M4 x 65mm
Exterior Furniture
(Aria Furniture shown)
2mm Latch Packer
Stile Width
38 - 43mm
43 - 49mm
46 - 55mm
55 - 58mm
Tools Required:
• Drill
• 3.2mm Drill Bit
• 10.0mm Drill Bit
Latch Wear Pad
or
Cylinder Double Key
• 20.0mm Drill Bit
• Phillips Screwdriver #2
• Square Screwdriver #1
Interior Furniture
(Aria Furniture shown)
92mm Drive Bar (Spindle)
Cylinder Key & Turn Knob
Advertisement
Related Manuals for Lockwood ASSA ABLOY Induro
Summary of Contents for Lockwood ASSA ABLOY Induro
- Page 1 Induro Mortice Lock Palladium Furniture, 2-Point Installation Instructions Application: Tools Required: • Drill • 20.0mm Drill Bit Provides secure deadlocking for aluminium hinged • 3.2mm Drill Bit • Phillips Screwdriver #2 doors. Palladium Xtra furniture available with daylatch snib. • 10.0mm Drill Bit •...
- Page 2 1. Door Preparation Route the door as shown in the routing diagram. Note: For Palladium Xtra Furniture, see separate instructions. TOP VIEW OF STILE 30mm backset routing is 28mm from face 40mm backset routing is 38mm from face 50mm backset routing is 48mm from face Ø...
- Page 3 Short Throw (13mm) Long Throw (24mm) 2. Setting Deadbolt Projection 3. Fixing Lock • Place the lock assembly into the stile • Before fixing the lock into the stile, select the correct deadbolt throw. • Fix the lock onto the stile using the two 8g x 7.5 screws •...
- Page 4 Latch 5. Latch Reversal • Undo the M4 latch screw • Reverse the latch as desired • Refasten the M4 latch screw to secure the latch • Insert the latch wear pad 2mm Latch Packer Note: 2mm Latch Packer is provided to allow for latch projection adjustment.