Currency Selection - Safescan 155-S User Manual

English
1 Sec
3. Set up your device

3.1. Currency selection

Select your currency by pressing the
The currency indicator starts blinking. Press
you have reached the desired currency*. Wait for 2 seconds, the
selected currency stops blinking to confirm selection.
NOTE: Currencies EUR and GBP are shown on the top right
hand side of the screen, all other currencies are shown in the
bottom left corner.
More info, articles, tutorials and videos support.safescan.com
4
Press the
power on the detector.
NOTE: When not in use, the display will
go into standby mode after 30 seconds.
The blue light remains on. Press
key 1x to activate. When a banknote is
inserted, the detector will be activated
automatically.
Blink...
2 Sec
key for approx. 1 second to
key for 2 seconds.
repeatedly until