Troubleshooting - Panasonic ER-GN300 Operating Instructions Manual

Troubleshooting

The cutting performance
has reduced.
There is an odd odour.
Blade does not move/
rotate smoothly.
The suction power is low.
The appliance is not
turned on.
If the problems still cannot be solved, contact the store where you
purchased the appliance or a service centre authorized by
Panasonic for repair.
16
PB016214 - ER-GN300
Problem
_(01GB)_06-20-18.indd 16
Action
Replace the blade.
(See pages 13~14)
Replace the alkaline batteries.
(See page 9)
Clean the inner blade.
(See pages 11~12)
Clean the trimmings box.
(See pages 11~12).
Close the water inlet.
(See pages 9 and 13).
Place the alkaline batteries correctly.
(See page 9).
Replace the alkaline batteries.
(See page 9).
2018/6/20 10:53:53