Panasonic ER-GN30 Service Manual

Nose & facial hair trimmer

Hide thumbs Also See for ER-GN30:

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

4 Schematic Diagram ---------------------------------------------- 3

Nose & Facial Hair Trimmer

Model No.

Asia

PAGE

bution is a violation of law.

Order Number SD1010A63CE

ER-GN30

PAGE

Table of Contents

Need help?

Do you have a question about the ER-GN30 and is the answer not in the manual?

Page 1 3 Disassembly and Assembly Instructions ---------------- 3 4 Schematic Diagram ---------------------------------------------- 3 5 Exploded View and Replacement Parts List ------------ 4 © Panasonic Electric Works Co., Ltd. 2010. All rights reserved. Unauthorized copying and distri- bution is a violation of law.
Page 2 1 Warning Caution: • Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder- ing iron, please be careful not to heat too long.
Page 3 3 Disassembly and Assembly Instructions 3.1. Disassembly Instructions 1. Remove the battery cover. 2. Unhook the housing B by inserting something like a slotted screwdriver into the bottom cavity as shown in the figure below. 3. Loosen a screw. 4 Schematic Diagram...
Page 4 5 Exploded View and Replacement Parts List Model No. : ER-GN30 Exploded View...
Page 5 Model No. : ER-GN30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks WERGN30X3188 PROTECTIVE CAP 1 [BG] WERGN30K1058 BLADE BLOCK 1 [BG] WERGN30K3121 BATTERY COVER 1 [BG] WERGN30K3122 BATTERY COVER 1 (Only for Taiwan), [BG] WERGN30B4008...