Using The Sr+ Mode With A Pioneer Plasma Display - Pioneer Elite VSX-80TXV-S Operating Instructions Manual

Other connections
• Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN jack of this receiver with the CONTROL
OUT jack of your plasma display.
VIDEO
Pioneer plasma
INPUT 1
display
DVD player
DVD/LD
AUDIO IN
STANDBY / ON PHASE
CONTROL
MULTI ROOM
LISTENING
ON/OFF CONTROL MODE DVD/LD TV/ SAT DVR /VCR1 DVR / VCR2 VIDEO/GAME
ENTER
MULTI JOG
PHONES
SYSTEM TUNING/ TUNER
SETUP RETURN TONE STATION EDIT SPEAKERS
MULTI JOG
This receiver
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma display, and just connect the audio (analog and/
or digital) to this receiver.
VIDEO
INPUT 2
Satellite receiver, etc
TV/SAT
AUDIO IN
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-80TXV
MULTI CH VIDEO
SIGNAL SB ch SOUND
CD CD-R / TAPE / MD FM/AM XM IN SELECT SELECT PROCESSING RETRIEVER
MASTER
VOLUME
S- VIDEO VIDEO/GAME INPUT MCACC
VIDEO L AUDIO R DIGITAL IN SETUP MIC
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer plasma display even easier. These
features include:
• On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the plasma
display.
• Automatic volume muting on the plasma display.
See also SR+ Setup for Pioneer plasma displays on
page 52 for more on setting up the receiver.
Important
• The additional SR+ features do not work when the
XM Radio function is selected.
DVD TV
CD CD-R
SLEEP
SR+
DIALOG E
1 Make sure that the plasma display and this receiver
are switched on and that they are connected with the
SR+ cable.
See Using this receiver with a Pioneer plasma display
above for more on connecting these components.
• Make sure you have also selected the display input to
which you've connected the receiver in The Input
Assign menu on page 50.
2 To switch SR+ mode on/off, press RECEIVER , then
the SR+ button.
The front panel display shows SR+ ON or SR+ OFF.
• The automatic volume muting feature is enabled
separately; see SR+ Setup for Pioneer plasma displays
on page 52.
DVR 2
DVR1 TV CTRL
XM RADIO ROOM 2
TUNER RECEIVER
SB ch ANALOG
ATT
MIDNIGHT/
DIMMER
LOUDNESS
PHASE S.RETRIEVER
08
49
En