Connecting A Dvd/Hdd Recorder, Vcr And Other; Video Sources; Using The Component Video Jacks - Pioneer Elite VSX-80TXV-S Operating Instructions Manual

Connecting your equipment
03
2 Connect an optical-type
your set-top box to the OPTICAL 2 (TV/SAT) input.
Use an optical cable for the connection.
Connecting a DVD/HDD recorder, VCR
and other video sources
This receiver has two sets of audio/video inputs and
outputs suitable for connecting analog or digital video
devices, including DVD/HDD recorders and VCRs.
VSX-80TXV
DIGITAL
IN 1
OUT
IN 1
IN 2 (DVR/
VCR1)
IN 2
(TV/SAT)
OUT
IN 3
(CD)
ASSIG-
NABLE
1 3
HDMI
CONTROL
OUT
XM
IN
IN
AUDIO
L
IN 1
(DVD/LD)
R
IN 2
(DVR/VCR2)
COAXIAL
ASSIGNABLE
1 2
OPTICAL COAXIAL
DIGITAL OUT
3
DVR, VCR, etc.
1 Connect the audio/video outputs of the video
player/recorder to the DVR/VCR1 AUDIO and VIDEO
inputs.
Use a stereo RCA/phono jack audio cable for the audio
connection and a video or S-video cable for the video
connection.
• For a second recorder, use the DVR/ VCR2 IN inputs.
Note
1 If your set-top box only has a coaxial digital output, you can connect it to one of the coaxial inputs on this receiver using a coaxial digital audio cable.
When you set up the receiver you'll need to tell the receiver which input you connected the set-top box to (see The Input Assign menu on page 50).
2 If your satellite/cable receiver doesn't have a digital audio output, you can skip this step.
3 • In order to record, you must connect the analog audio cables (the digital connection is for playback only).
• If your video component doesn't have a digital audio output, you can skip this step.
4 If your recorder only has a coaxial digital output, you can connect it to one of the coaxial inputs on this receiver using a coaxial digital audio cable. When
you set up the receiver you'll need to tell the receiver which input you connected the recorder to (see also The Input Assign menu on page 50).
14
En
1
digital audio output from
MULTI-ROOM & SOURCE
ANTENNA
OPTICAL
ROOM 2(ZONE 2)
OUT IN
IR
AM LOOP
COMPONENT VIDEO
L
Y P P Y P P
B R B R
IN
OUT
1
IN IN
2 3
Y P P Y P P
B R B R
R
ASSIGNABLE 1 3
S-VIDEO
IN IN OUT IN OUT
VIDEO
IN OUT IN IN IN OUT IN OUT
CD CD-R/TAPE/MD DVD/LD TV/SAT DVR/VCR1 DVR/VCR2
R AUDIO L VIDEO S-VIDEO R AUDIO L
AV IN AV OUT
2 If the device can record, connect the DVR/VCR1
AUDIO and VIDEO outputs to the recorder's audio/
2
video inputs.
Use a stereo RCA/phono jack audio cable for the audio
connection and a video or S-video cable for the video
connection.
• For a second recorder, use the DVR/ VCR2 outputs.
3 If the device can output digital audio, connect an
optical-type
the OPTICAL 1 (DVR/VCR1) input.
Use an optical cable for the connection.
• For a second recorder, use the COAXIAL 2 ( DVR/
VCR2) inputs.
PRE OUT
CENTER
L L

Using the component video jacks

SUB R SUR- Component video should give superior picture quality
FRONT WOOFER ROUND
12V TR
(DC
when compared to composite or S-video. You can also
5
take advantage of progressive scan video (if your source
IN MONITOR
MULT
OUT
MON
OUT
and TV are both compatible), which delivers a very stable,
flicker-free picture. See the manuals that came with your
CENTER
IN L
TV and source component to check whether they are
compatible with progressive-scan video.
R
FRONT SUB
WOOFER
MULTI CH IN
VIDEO S-VIDEO
1 2
3
digital audio output from the recorder to
4