Table of Contents
Advertisement
5.2 Imaging Problems (or Both Digital and Analog)
The screen is too bright or too dark.
• Use "Brightness" or "Contrast" in the Setting menu to adjust it (see
LCD monitor backlight has a limited life span. If the screen becomes dark or begins to
flicker, contact your local EIZO representative.)
• If the screen is too bright, try changing the Auto EcoView setting to "On". The monitor
detects the ambient brightness to adjust the screen brightness automatically (see
EcoView
[} 13]).
The brightness changes on its own.
• Try changing the Auto EcoView setting to "Off" (see
Characters and images are blurred
• Check whether the PC is configured to meet the resolution and vertical scan frequency
requirements of the monitor (see
to change your computer settings, refer to our web site (www.eizoglobal.com).
• When an image is displayed with a resolution other than recommended, the text and
lines of the image may appear blurry. In this case, try adjusting "Sharpness" in the
Setting menu (see
• Try setting the display magnification on the operating system to "100 %". When using
multiple monitors, try setting the magnification of display to "100 %" on all monitors.
Afterimages appear.
• Afterimages are particular to LCD monitors. Avoid displaying the same image for a long
time.
• Use the screen saver or power saving function to avoid displaying the same image for
extended periods of time.
• Depending on the image, an afterimage may appear even if it was displayed for a short
period of time. To remove such a phenomenon, change the image or keep the power
turned off for several hours.
Green / red / blue / white / dark dots remain on the screen.
• This is due to LCD panel characteristics and not a malfunction.
Interference patterns or pressure marks remain on the LCD panel.
• Leave the monitor with a white or black screen. The symptom may disappear.
Noise appears on the screen.
• When inputting HDCP system signals, normal images may not be displayed
immediately.
The positions of windows and icons are shifted when the monitor is turned
off/on or when restored from power saving mode.
• Turn the setting "On" for "Compatibility Mode" on the "Administrator Settings" menu (see
Compatibility Mode
Supported Resolutions
Sharpness
[} 19]).
[} 24]).
Troubleshooting | 5
Color
[} 16]). (The
Auto EcoView
[} 13]).
[} 10]). For information on how
Auto
27
Advertisement
Table of Contents
