Troubleshooting Information - Markem Imaje SmartDate X40 Instruction Manual

Troubleshooting - Information
LOW RIBBON
The Ribbon has almost run out.
CASSETTE OPEN
Check cassette is firmly in place with latch closed.
Ensure handle is in the CLOSED position.
CASSETTE LOAD ERROR
Ensure the shuttle or printhead is in the HOME position.
CALIBRATION FAILED
Check ribbon for breaks or slackness
RIBBON BREAK DETECT
If ribbon is broken, reweb ribbon
S/N :Serial number :
Ribbon type:
For Marking & Coding Equipment.
Photographs and drawings are not binding in detail. This document was originally written in English. The
English text of this document shall alone be authentic and shall prevail in the event of a dispute.
Markem-Imaje reserves the right to modify the specifications of its products without prior notice. Any repro-
duction, even partial, of this document is prohibited. Original manual.
27
© 2012 Markem-Imaje All Rights Reserved. English version
Instruction manual