Control Messages - Markem Imaje SmartDate X40 Instruction Manual

Control messages

In the case of a Warning the SmartDate X40 will continue
printing if in Producing mode. The Warning does not stop
the print cycle.
An example of a Warning might be "Low Ribbon"
Warning 2109
Low Ribbon
A new ribbon will be
required soon
Fault 1300
Cassette open
Close cassette to clear
fault
If a Fault occurs the SmartDate X40 will stop printing if in
Producing mode and the Fault Alert screen will appear.
A complete list of error messages can be found in the
Troubleshooting section of the Maintenance manual PDF
on the CD.
Instruction manual
26