Markem Imaje SmartDate X40 Instruction Manual page 6

Safety instructions
■ Installation
First time Installations will normally be carried out by qualified
Markem.Imaje service technicians.
For experienced customers who have existing SmartDate units
and wish to carry out installation themselves, please first check
with Markem.Imaje to ensure that this is advisable.
■ Use
The printer is designed for thermal transfer printing. Any other use
of the printer is prohibited, and any consequences shall be under
the entire responsibility of the user.
■ Servicing
DISCONNECT the printer from the mains before any operations
requiring components to be removed or exchanged.
Use appropriate tools for any work on the electrical and pnuematic
circuits.
DO NOT operate the machine with any covers removed. All covers
must be in place using the appropriate number of fasteners. It is
essential that electrical and non-electrical connector dust covers
(provided with the machine) are fitted to all unused connectors to
protect against dust and dirt and possible static damage to internal
components.
DISCONNECT the air supply before undertaking work on the
printer.
Do not adjust the regulator pressure above 6 Bar under any
circumstances. Doing so could make the SmartDate X40 unsafe.
Instruction manual
6