Ecoflow App; Getting Started; System Overview - EcoFlow Power Hub User Manual

EcoFlow App

Privacy Policy
By using EcoFlow Products, Applications and Services, you consent to the EcoFlow Term
of Use and Privacy Policy, which you can access via the "About" section of the "User" page
on the EcoFlow App or on the official EcoFlow website at https://www.ecoflow.com/policy/
terms-of-use and https://www.ecoflow.com/policy/privacy-policy
Bluetooth of this product can only be connected with one EcoFlow App
account, if you need to connect the product through another account, you can
reset the Bluetooth through the App or by long pressing the DC button of the
product for 3 seconds.

Getting Started

System Overview

1. If the product is installed in an enclosed space, proper ventilation is a MUST
to prevent this product from overheating.
2. For safety reasons, it is recommended to install a Ground Fault Circuit
Interrupter (GFCI), also known as Residual Current Device (RCD) in the
AC input and AC output of the Power Hub. Please refer to local regulations
regarding grounding of autonomous power systems.
3. Before connecting this product to EcoFlow LFP Battery, ensure that there is
no charging input connected to Power Hub and LFP Battery is powered off.
4. It is not recommended to use one Power Hub with both 2kWh and 5kWh LFP
battery at the same time.
5. It is not recommended to connect or disconnect LFP battery when the
system is on.
Control, monitor and customize your Power Kits from afar with the
EcoFlow App. Download at:
https://download.ecoflow.com/app
EN
3