Adjusting Gamma - Epson Home Cinema 2350 User Manual

• MPEG Noise Reduction: Reduces the noise or static in MPEG video
• Detail Enhancement: Enhances details to create clear outlines
Note: Noise Reduction and MPEG Noise Reduction are available when Image Processing is set
to Fine, Image Preset Mode is not set to Off, and the input signal is not 4K or 21:9 (2560 × 1080).
Note: Detail Enhancement is available when Image Preset Mode is not set to Off.
Note: Frame Interpolation is available when Image Processing is set to Fine, Image Preset Mode
is not set to Off, 4K Enhancement is set to Off for input signals other than 1080p 24Hz, and the input
signal is not 4K.
7. Press the
Parent topic:
Related references
Image Quality Settings - Image Menu

Adjusting Gamma

You can adjust the gamma to improve differences in halftone brightness that vary depending on the
connected device.
Note: Project a still image to adjust the gamma; you cannot adjust it properly when projecting a movie or
other moving video. Medical images may not reproduce correctly depending on your operating
environment and screen.
1. Turn on the projector and switch to the image source you want to use.
2. Press the
3. Select the Image menu and press Enter.
4. Select the Expert Settings > Gamma setting and press Enter.
return button to exit the menus.
Using Basic Projector Features
menu button on the projector remote control.
62