Advertisement
7.
Absolute Maximum Ratings
(The temperature for unspecified temperature ranges is Ta = 25°C; voltage is ground referenced.)
Characteristics
Power supply voltage 1
Power supply voltage 2
Voltage difference between pins 1
Voltage difference between pins 2
Voltage difference between pins 3
Input voltage (I/O pin)
Input pin voltage 1
Input pin voltage 2
Input pin voltage 3
Signal pin voltage
Maximum input power
Power dissipation
Storage temperature range
The absolute maximum ratings of a semiconductor device are a set of specified parameter
values, which must not be exceeded during operation, even for an instant. If any of these
rating would be exceeded during operation, the device electrical characteristics may be
irreparably altered and the reliability and lifetime of the device can no longer be guaranteed.
Moreover, these operations with exceeded ratings may cause break down, damage and/or
degradation to any other equipment. Applications using the device should be designed such
that absolute each maximum rating will never be exceeded in any operating conditions.
Before using, creating and/or producing designs, refer to and comply with the precautions
and conditions set forth in this documents.
Table 7-1 Absolute Maximum Ratings
Symbol / Pin Name
COM_VDD, A_VDD_5V
A_VDD_3V
COM_VDD - A_VDD_3V
A_VDD_5V - A_VDD_3V
COM_VDD - A_VDD_5V
DATA_IO, CS, CLK, MOSI,
MISO
ENB, 3V/5V
RESET, TEST, MODE1,
MODE2
RX_SW, TX_SW
RF_OUT, PA_OUT
RF_IN
PD
Tstg
77
TC32306FTG
Rating
Min. -0.2 / Max. +6.0
Min. -0.2 / Max. +3.6
Min. -0.2 / Max. +6.0
Min. -0.2 / Max. +6.0
Min. -0.2 / Max. +0.2
Min. -0.2 /
Max. COM_VDD+0.2 or 6.0
(Whichever is lower.)
Min. -0.2 /
Max. COM_VDD+0.2 or 6.0
(Whichever is lower.)
Min. -0.2 / Max. +6.0
Min. -0.2 /
Max. A_VDD_5V+0.2 or 6.0
(Whichever is lower.)
Min. -0.2 / Max. +3.6
Max. 10
Max. 1.0
Min. -55 / Max. +125
Unit
V
V
V
V
V
V
V
V
V
V
dBm
W
°C
2015-10-01
Advertisement
