Bosch UniversalChainPole 18 Original Instructions Manual page 19

Hide thumbs Also See for UniversalChainPole 18:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12
Problem
Possible Cause
Saw chain teeth facing wrong way/direction
Over heating of tool
External or internal wiring defect
On/Off switch (16) defective
Maintenance and Service
Maintenance, Storage and Transportation (see
figure P)
Before any work on the machine itself (e. g. mainten-
u
ance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch with the locking button.
Do not modify the product. Unauthorized modifications
u
may impair the safety of your product.
Before storing, clean the product with a cloth before stor-
age.
Remove the oil from the oil tank before storage.
When transporting or storing the pole pruner, always fit the
guide bar cover.
Note: Do not leave pole pruner hanging on a branch in the
tree when interrupting work.
Store and transport telescopic pole pruner with battery re-
moved and protection blade cover placed.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Bosch Power Tools
Corrective Measure
Reassemble with saw chain teeth in correct direc-
tion
Allow machine to cool down and restart
Contact Bosch Service Center
Contact Bosch Service Center
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.
When shipping by third parties (e.g.: by air transport or for-
warding agency), special requirements on packaging and la-
belling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the bat-
tery in such a manner that it cannot move around in the
packaging. Please also observe the possibility of more de-
tailed national regulations.
Disposal
The product, batteries, accessories and pack-
aging should be sorted for environmental-
friendly recycling.
Do not dispose of the product and batteries/re-
chargeable batteries into household waste!
Only for EU countries:
According to the European Guideline 2012/19/EU, products
that are no longer usable, and according to the European
Guideline 2006/66/EC, defective or used battery packs/
batteries, must be collected separately and disposed of in an
environmentally correct manner.
Only for United Kingdom
According to Waste Electrical and Electronic Equipment Reg-
ulations 2013 (2013/3113) and the Waste Batteries and
Accumulators Regulations 2009 (2009/890), power tools
that are no longer usable must be collected separately and
disposed of in an environmentally friendly manner.
Battery packs/batteries:
Li-ion:
Please observe the notes in the section on transport (see
"Transport", page 19).
English | 19
F 016 L94 358 | (10.12.2021)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Universal chain pole 18 solo

Table of Contents