Upgrading Or Adding Pri Files: Example - Allied Telesis AlliedWare Plus AR Series Technical Manual

Upgrading or adding PRI files: example

The following command and output examples show the GENERIC PRI version 020.007.001 being
updated for firmware and PRI files to version 03.04.03.00. First use the show 5g tech firmware
command to see the PRI and build ID for the GENERIC PRI:
awplus#show 5g tech firmware
AT!PRIID
PRI Part Number: 9909738
Revision: 001.007
Customer: Generic
Carrier PRI: 9999999_9909622_SWIX55C_03.04.03.00_01_DOCOMO_030.012_001
Carrier PRI: 9999999_9909621_SWIX55C_02.08.01.00_00_GENERIC_020.007_001
Carrier PRI: 9999999_9910398_SWIX55C_03.04.03.00_01_TELSTRA_030.016_000
AT!IMPREF
!IMPREF:
preferred fw version:
preferred carrier name:
preferred config name:
preferred subpri index:
current fw version:
current carrier name:
current config name:
current subpri index:
AT!IMAGE
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID
FW 1
FW 2
FW 3
Max FW images: 3
Active FW image is at slot 1
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID
PRI FF
PRI FF
PRI FF
Max PRI images: 50
AT!RFCID
!RFCID:
CMW_HWID: 1007
CMW_BID : 0
MMW_HWID: 0
MMW_BID : 0
C613-22132-00 REV A
03.04.03.00
DOCOMO
DOCOMO_030.012_001
000
03.04.03.00
DOCOMO
DOCOMO_030.012_001
000
GOOD 127 0 0
EMPTY 0 0 0
EMPTY 0 0 0
GOOD 0 0 0
GOOD 0 0 0
GOOD 0 0 0
BUILD_ID
?_? 03.04.03.00_?
BUILD_ID
030.012_001 03.04.03.00_DOCOMO
020.007_001 02.08.01.00_GENERIC
030.016_000 03.04.03.00_TELSTRA
5G Mobile Broadband UTM Firewall
|
Carrier support Page 34