Show Commands To Monitor What Is Happening - Allied Telesis AlliedWare Plus AR Series Technical Manual

Show commands to monitor what is happening

The show 5g sim command displays details about the SIM card, the state of the network and APN
configuration attached to the SIM card. For the SIM card slot to be active the administration state
must be up, a valid APN profile must be configured and attached to the 'wwan0' interface.
awplus#show 5g sim
Slot 1 is
Slot 1 administrative state
Slot 1 present, up and configured
Slot 1 is
Slot 1 APN
Slot 1 APN name
Slot 1 User name
Slot 1 Password
Slot 1 Authentication type
Slot 1 Packet data protocol type
Slot 1 Carrier name
Slot 2 is
Slot 2 administrative state
Slot 2 present, up and configured
Slot 2 is
Slot 2 APN
Slot 2 APN name
Slot 2 User name
Slot 2 Password
Slot 2 Authentication type
Slot 2 Packet data protocol type
Slot 2 Carrier name
SIM Failover Interval
Network is running
The show 5g sim detail command displays details about the active SIM such as the Integrated
Circuit Card ID (ICCID). This 19-20 digit number is typically printed on the back of the SIM card. The
ICCID is a globally unique serial number that identifies the SIM card.
awplus#show 5g sim detail
Current SIM Details:
Slot 1 is
Slot 1 administrative state
Slot 1 present, up and configured
Slot 1 is
Slot 1 APN
Slot 1 APN name
Slot 1 User name
Slot 1 Password
Slot 1 Authentication type
Slot 1 Packet data protocol type
Slot 1 Carrier name
Slot 1 ICCID
C613-22132-00 REV A
: Present
: Up
: Yes
: Active
: carrier1
: carrierabc
: Not Set
: Not Set
: Not Set
: ipv4v6
: generic
: Present
: Up
: Yes
: Backup
: carrier2
: carrierxyz
: Not Set
: Not Set
: Not Set
: ipv4v6
: generic
: 300 seconds
: True
: Present
: Up
: Yes
: Active
: carrier1
: carrierabc
: Not Set
: Not Set
: Not Set
: ipv4v6
: generic
: 8964011910081631877
How to use the 5G cellular modem
5G Mobile Broadband UTM Firewall
|
Page 12