Advertisement
Table of Contents
"Fastback" Porcelain Trim kit accessory
W
ARNING
Be sure all packing materials are removed from the island trim before operating it.
The Fastback Porcelain Trim becomes very hot during operation. DO NOT touch the Fastback Porcelain Trim area
while the appliance is on and for several minutes after the appliance is off. Some parts of the Fastback Porcelain Trim
and surrounding areas become hot enough to cause burns. Allow appliance sufficient time to cool before touching or
cleaning Fastback Porcelain Trim areas.
Keep children well out of reach the Fastback Porcelain Trim .
To change the backsplash with Fastback Porcelain Trim please follow the instructions below:
1.
Remove the 3 screws in the back part of the backsplash and untighten the two screws below the slots:
SCREWS BELOW THE SLOTS (CIRCLED):
2.
Remove the backsplash;
BACK SCREWS
www.forzacucina.com
Advertisement
Table of Contents
Related Manuals for Forza Fastback
Summary of Contents for Forza Fastback
- Page 1 The Fastback Porcelain Trim becomes very hot during operation. DO NOT touch the Fastback Porcelain Trim area while the appliance is on and for several minutes after the appliance is off. Some parts of the Fastback Porcelain Trim and surrounding areas become hot enough to cause burns. Allow appliance sufficient time to cool before touching or cleaning Fastback Porcelain Trim areas.
- Page 2 Assemble the Fastback Porcelain Trim, starting from the three back screws: Tighten the two screws (circled) below the Fastback Porcelain Trim slots: www.forzacucina.com...
- Page 3 INSTALLATION The range is a free standing unit. If the unit is to be placed adjacent to cabinets, the clearances shown in Figure 1 on the installation manual are required. The same clearances apply to island installations, except for the overhead cabinets, which must have a space wide enough to accept the flared island hood.
Need help?
Do you have a question about the Fastback and is the answer not in the manual?
Questions and answers