Assembly, Installation And Connection Instructions; Transport; Storage; Location - benza CR 450 Use And Maintenance Manual

The machine may not be modified in any way without the express authorization of the manufacturer. Always
use replacement parts and accessories that are approved by the manufacturer. The use of other parts or any
unauthorized alteration shall exempt the manufacturer from any liability whatsoever.
The safety of the machine shall only be ensured if used adequately in accordance with the instructions in this
manual.
Changes or modifications to the conditions of use can only be made following a written authorization by
INTERNACO.

6. ASSEMBLY, INSTALLATION AND CONNECTION INSTRUCTIONS

6.1. TRANSPORT

The machine is packed on a pallet in a cardboard box with the diamond disc disassembled. It is shipped in
accordance with the demands of the customer and its destination.
Table 3.Weight of the machine
MODEL WEIGHT SHIPPING
WEIGHT
CR 450 125 KG 135 KG

6.2. STORAGE

When storing the machine, place it on a horizontal surface in a dry place away from dust and dirt.
Protect its parts by wrapping them in plastic.

6.3. LOCATION

The cutting cutter is a machine designed for cutting road surfaces, asphalt, concrete, etc.
CUTTING WOOD OR SIMILAR MATERIALS IS PROHIBITED.
Before starting the machine, make sure the work area is clear and free of obstacles and there is not collision
risk.
The use of the machine in places where there is a risk of fire or explosion is strictly prohibited.
We also recommend against operating the machine in areas where there are flames, sparks or welding is
being conducted.
11