Maintenance; Cleaning - WHEELSPEED WS1 User Manual

Section 6

MAINTENANCE

• Do not perform any maintenance when the power is on, or the battery is charging. Do not let water or liquids
get into the scooter as this will cause permanent damage to the electronic components.
• After each ride, especially if you have traveled a long distance, inspect your scooter.
1. Check the front tire for proper inflation and cracks on the walls of the tire. Proper inflation is
30 PSI / 2.1 BAR. Keeping the tires properly maintained will help prevent flats and damage.
For inflation instructions, see Section 3.3.
2. Inspect the brake to make sure it's working properly.
3. Make sure all screws and bolts are taut and properly fastened to prevent injury and unnecessary wear and tear.
For questions, concerns, or part replacement, please contact customer service.

6.1 Cleaning

The WS1 may need cleaning after riding for extended periods of time. See the following tips below.
• Completely power off the scooter before cleaning.
• Use dry, non-abrasive cloth to gently remove debris or dust.
• If needed, dampen cloth with water or a mild cleaner and wipe off the scooter.
• Never use alcohol or ammonia-based cleaning solutions.
• Never spray liquid directly onto any part of the scooter.
• Do not allow any type of liquid to come in contact with the scooter's electronic parts.
WS1 USER MANUAL 16