Display Information - WHEELSPEED WS1 User Manual

2.3 Display Information

The WS1's display features several different elements. Be sure you understand these before
attempting to ride. Press and hold the power button approx. 3 seconds to turn the scooter on/off.
1. Battery Level Indicator - This icon indicates how much battery life you have left. As power goes
down, the icon will indicate different levels.
2. Speedometer - These numbers indicate the current speed and will change when the WS1
is in use. The defaul speed unit is MPH, quick press the power button 4 times to switch the speed
unit between MPH and KM/H.
3. Gear - These icon indicates the gear status. When you switch the gear to gear 1, the icon will be
yellow and gear 2 will be red.
4. Pushing asist - When you switch the soocter to Pushing asist mode, this icon will light up.
5. Headlight - When the headlight is on, the Headlight icon will light up.
6. Cruise - Cruising is as simple as maintaining speed for at least 8 seconds. Quick press the power
button for 5 times to turn off and turn on the Cruise mode.
When the battery level is low, stop riding, turn off the scooter, and fully recharge it before
riding again.
07
2
1
4
5
3 6