Humminbird PIRANHAMAX 4 Install Manual page 3

PIRANHAMAX 4 TRANSDUCER
Install Guide
WB.TD.01
https://support.legendboats.com/
STEP 4
Using marine grade Silicone, seal the pilot
holes prior to installing the Mounting
Bracket.
STEP 5
Using the supplied hardware, install the
Mounting Bracket onto the Transom.
Mount the transducer in the highest position.
STEP 6
Route the Transducer wire vertically along
the transom, marking the location of each
wire clip.
Drill into the Transom, apply silicone and
install the Wire Clips into the Transom.
3