Daikin C Series Installation Manual page 11

FWPMM3A(Z)V1 / FWPMM4A(Z)V1 / FWPMM6A(Z)V1 / FWPMM7A(Z)V1 / FWPMM8A(Z)V1 /
FWPMM9A(Z)V1 / FWPMM11A(Z)V1 / FWPMM12A(Z)V1 / FWPMM14A(Z)V1 / FWPMM16A(Z)V1
(with controller)
FCU 1
V ALVE L
3WV
X1
IMPORTANT: * These values are for information only. They should be checked and selected to comply with local and/or
national codes and/or national codes and regulations. They are also subject to the type of installation and
size of conductors.
** The appropriate voltage range should be checked with label data on the unit.
A main switch or other means for disconnection, having a contact separation in all poles, must be incorporated
in the fi xed wiring in accordance with the relevant local and national legislation.
Model
Voltage Range**
Power Supply Cable Size*
Number of Conductors
Recommended Time Delay Fuse*
Model
Voltage Range**
Power Supply Cable Size*
Number of Conductors
Recommended Time Delay Fuse*
Note:
This is a proposed wiring connection. It may change subject to the chiller unit and must comply with the local and national
code and regulations.
FCU 2
N V ALVE L
3WV
L
N
220-240V/1ø/50Hz or
208-230V/1ø/60Hz
X2
!
There must be an all pole
Chiller
disconnection in the supply
mains with a contact separation
of at least 3mm.
All power line must be from
the same phase.
Indoor FWPMM3A(Z)V1 FWPMM4A(Z)V1 FWPMM6A(Z)V1 FWPMM7A(Z)V1 FWPMM8A(Z)V1
Indoor
220V-240V/1Ph/50Hz + ! or 208V-230V/1Ph/60Hz + !
2
mm 1.5
3
A 1
Indoor FWPMM9A(Z)V1 FWPMM11A(Z)V1 FWPMM12A(Z)V1 FWPMM14A(Z)V1 FWPMM16A(Z)V1
Indoor
220V-240V/1Ph/50Hz + ! or 208V-230V/1Ph/60Hz + !
mm 2 1.5
3
A 8
FCU 3
N V ALVE L
3WV
L
N
220-240V/1ø/50Hz or
208-230V/1ø/60Hz
X3
3WV
X1, X2, X3, Relay (220 ~ 240V, 10A)
1.5 1.5
3 3
2 4
1.5 1.5
3 3
10 10
1-9
N
L
N
220-240V/1ø/50Hz or
208-230V/1ø/60Hz
3 way valve
Field supply
1.5 1.5
3
4
1.5 1.5
3
10 12
3
6
3