Operation; Switching The Downdraft Extractor On; Setting/Changing The Power Level; Switching The Downdraft Extractor Off - Miele SmartLine Operating And Installation Instructions

Operation

Switching the downdraft
extractor on
 Insert the extraction grille.
 Touch the  sensor control.
The sensor controls light up.
If no further entry is made, the
downdraft extractor will switch itself
off after a few seconds.
Setting/changing the power
level
For light to heavy cooking vapours and
odours, select from power levels 1 to 3.
For short periods of cooking food with
intensive vapours and a strong aroma,
e.g. when searing meat, select Booster
setting B.
 Touch the desired power level.
Booster
The maximum duration for the Booster
is 10 minutes.
 To switch it off early, set a different
power level.
22
Switching the downdraft
extractor off
 Touch the  sensor control.
The sensor controls go out.
If the downdraft extractor is not
switched off, it will switch itself off
12 hours after the last automatic
operation.

Run-on time

In order to rid kitchen air of steam and
odours, the downdraft extractor
continues to run for 5 minutes on the
power level that was set last. The
power level is gradually reduced during
the run-on time. The current power level
pulsates during the run-on time.
Tip: To help release vapours effectively
with pans over 15 cm high, place a
wooden spoon between the lid and the
pot.