Introduction; Organization; Safety Considerations; Related Documents - Agilent Technologies 6611C Service Manual

Introduction

Organization

This manual contains information for troubleshooting and repairing Agilent Models 6611C, 6612C, 6613C and
6614C System DC Power Supplies. Hereafter all models will be referred to as the dc power supply.
This manual is organized as follows:
Organization
Chapter 1
Chapter 2 Performance tests
Chapter 3 Troubleshooting procedures
Principles of operation on a block-diagram level
Chapter 4
Chapter 5 Replaceable parts
Chapter 6 Diagrams

Safety Considerations

WARNING: Hazardous voltages exist within the dc power supply chassis.
This dc power supply; is a Safety Class I instrument, which means it has a protective earth terminal. This terminal
must be connected to earth ground through a power source equipped with a 3-wire, ground receptacle. Refer to the
"Safety Summary" page at the beginning of this manual for general safety information. Before operation or repair,
check the dc power supply and review this manual for safety warnings and instructions. Safety warnings for specific
procedures are located at appropriate places in the manual.

Related Documents

The following documents are shipped with your dc power supply:
a a User's Guide, Agilent part number 5962-8194, containing installation, operating, and calibration information
a a Programming Guide, Agilent part number 5962-8198, containing detailed GPIB programming information.
1
9