General Information; Introduction; Safety Considerations; Instrument Identification - Agilent Technologies 66000A Installation Manual

General Information

Introduction

This guide describes how to install the Agilent 66000A Modular Power System (MPS) Mainframe. It includes the
following information:
specifications and operating characteristics
n
n connecting the power cord to the mainframe
setting the address and frame switches
n
n installing modules in the mainframe
n mainframe rear panel connections
Mainframe turn-on and checkout procedures are included with the module manual since an installed module is required to
properly check out mainframe operation. Refer to the module User's Guide for more information.
Programming Guide for Agilent Series 66lxxA MPS Power Modules
Installation Guide for DC Module Connectors
User's Guide for Agilent 66lxxA Power Modules
Service Guide for Agilent Series 66lxxA MPS Power Modules
Service Guide for Agilent 66000A Modular Power System Mainframe
Quick Reference Card for optional Agilent 66001A MPS Keyboard
Agilent 66000A Modular Power System Product Note

Safety Considerations

This mainframe is a Safety Class 1 instrument, which means that it has a protective earth terminal. That terminal must be
connected to earth ground through a power source equipped with a 3-wire ground receptacle.
Refer to the safety summary page at the beginning of this manual for general safety information. Before installation or
operation, check the mainframe and review this manual for safety markings and instructions. Safety information for specific
procedures is located at the appropriate places in this manual.

Instrument Identification

Agilent Technologies instruments are identified by a 10-digit serial number. The format is described as follows: first two
letters indicate the country of manufacture. The next four digits are a code that identify either the date of manufacture or of a
significant design change. The last four digits are a sequential number assigned to each instrument.
Item Description
US The first two letters indicates the country of manufacture, where US = USA; MY = Malaysia; SG = Singapore.
3648 This is a code that identifies either the date of manufacture or the date of a significant design change.
0101 The last four digits are a unique number assigned to each power supply.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Related Documents Agilent Part No.
5959-3362
5959-3366
5959-3360
5959-3364
66000-90003
66001-90001
5988-2800EN
General Information
1
9