Figure 123 Burst Level Adjustment; Figure 124 Set The Burst Level - JVC GR-DVF11U Manual

Digital Video Cassette Technology
Burst Level Adjustment
Select the Burst Level procedure in the list box.
1.

Figure 123 Burst Level Adjustment

Read the procedure.
2.
If it is not already selected, click the FA Camera tab in the Deck Controller
3.
window to put the unit in the Camera mode.
Use the DSP Controller to turn on the Color Bars.
4.
Click the Start button in the Adjustment Utility window. The Confirmation
5.
window appears.
Click the Yes button in the Confirmation window. The Editing window
6.
appears.
Use an oscilloscope to observe the video output signal. Click the Up and
7.
Down Arrows in the Editing window to set the amplitude of the Color Burst
of the video output signal to 0.28 ± 0.03 V p - p, or the value specified in
the software.

Figure 124 Set the Burst Level

80