Mercedes-Benz GLB 2023 Operator's Manual page 346

344 Wheels and tires
the jack must be positioned vertically
under the jacking point of the vehicle.
* NOTE Damage to the vehicle due to the
jack
If you do not position the jack at the jack sup-
port points provided for this purpose, you
could damage your vehicle.
Only position the jack at the jack sup-
#
port points provided for this purpose.
Take the ratchet out of the tire-change tool kit
#
and place it on the hexagon nut of the jack so
that the letters "AUF" are visible.
Position support 2 of jack 4 on jack sup-
#
port point 1.
Turn ratchet 3 clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the ground.
Turn ratchet 3 until the tire is raised a maxi-
#
mum of 1.2 in (3 cm) from the ground.
Loosen and remove the wheel (
/
#
Removing a wheel
Requirements
The vehicle is raised (
R
* NOTE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognize
dangers.
When changing a wheel, avoid applying any force
to the brake disks, as this could impair the level of
comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on a
#
dirty surface.
2
1 and
Unscrew the uppermost wheel bolt com-
#
pletely.
page 344).
page 342).
/