General; Location Of Controls - Sony CDX-GT610U Service Manual

• LOCATION OF CONTROLS

• CDX-GT610U
Location of controls and basic operations
Main unit
1 2 3 4
OFF PUSH SELECT
DSO SOURCE
SEEK SEEK
EQ3 MODE
CAT GP/ALBM
BTM DSPL 1
8 9 q; qa qs qd
Front panel removed
qh
RESET
Card remote commander
RM-X151
wa
1
OFF ATT
ws
4
SOURCE SEL MODE
qs
ql
+
wd
–
qd qg
DSPL SCRL
1 2 3
wf
4 5 6
+
w;
VOL
–
6
• CDX-GT660U: E, Chinese model/GT660US
Location of controls and basic operations
Main unit
1 2 3 4
OFF PUSH SELECT
DSO SOURCE
SEEK SEEK
EQ3 MODE
GP/ALBM
BTM DSPL 1
8 9 q; qa qs qd
Front panel removed
qj
RESET
Card remote commander
RM-X151
ws
1
OFF ATT
wd
4
SOURCE SEL MODE
qs
w;
+
wf
–
qh
qd
DSPL SCRL
1 2 3
wg
4 5 6
+
wa
VOL
–
6
SECTION 1

GENERAL

5 6 7
OPEN
REP SHUF BBE MP PAUSE
2 3 4 5 6 SCRL
CDX-GT610U
qf qg
qj qk
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A OFF button
To power off; stop the source.
B DSO button 4
To select the DSO mode (1, 2, 3 or OFF).
The larger the number, the more enhanced
the effect.
C Volume control dial/select button 10
To adjust volume (rotate); select setup items
(press and rotate).
D SOURCE button
To power on; change the source (Radio/CD/
MD* 1 /USB/AUX/SAT* 2 ).
E Display window
F USB terminal 9
To connect to the USB device.
G OPEN button 5
5 6 7
OPEN
REP SHUF BBE MP PAUSE
2 3 4 5 6 SCRL
CDX-GT660US
CDX-GT660U
qf qg qh
qk ql
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A OFF button
To power off; stop the source.
B DSO button 4
To select the DSO mode (1, 2, 3 or OFF).
The larger the number, the more enhanced
the effect.
C Volume control dial/select button 10
To adjust volume (rotate); select setup items
(press and rotate).
D SOURCE button
To power on; change the source (Radio/CD/
1
MD* /USB/AUX).
E Display window
F USB terminal 9
To connect to the USB device.
G OPEN button 5
CDX-GT610U/GT660U/GT660US
H EQ3 (equalizer) button 10
The following buttons on the card remote
commander have also different buttons/functions
To select an equalizer type (XPLOD,
from the unit. Remove the insulation film before
VOCAL, EDGE, CRUISE, SPACE,
use (page 4).
GRAVITY, CUSTOM or OFF).
ql < (.)/, (>) buttons
I Receptor for the card remote
commander
J SEEK –/+ buttons
w; VOL (volume) +/– button
CD/MD* 1 /USB* 3 :
To skip tracks (press); skip tracks
continuously (press, then press again within
wa ATT (attenuate) button
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
ws SEL (select) button
To tune in stations automatically (press); find
a station manually (press and hold).
K BTM/CAT*
2 button 8 wd M (+)/m (–) buttons
To start the BTM function (press and hold).
L MODE button 8, 10, 11
wf Number buttons
To select the radio band (FM/AM); select the
SAT tuner band (mode)* 2 ; select the unit* 4 ;
select the play mode* 5 .
M DSPL (display) button 8, 9
*1 When an MD changer is connected.
*2 When the SAT tuner is connected.
To change display items.
*3 When a USB device is connected.
N Number buttons
*4 When a CD/MD changer is connected.
*5 When an ATRAC Audio Device is connected.
CD/MD* 1 /USB* 3 :
*6 When an ATRAC CD is played.
(1)/(2): GP* /ALBM*
6 7 –/+
*7 When an MP3/WMA/AAC is played.
To skip albums (press); skip albums
*8 If the changer/USB is connected, the operation is
continuously (press and hold).* 8
(3): REP 8, 10, 12
*9 When playing back on this unit and a USB device.
(4): SHUF 8, 10, 12
Notes
(5): BBE MP* 9 2
• When ejecting/inserting a disc, keep any USB
To activate the BBE MP function, set
devices disconnected to avoid damage to the disc.
"BBE MP-ON." To cancel, set "BBE
• If the unit is turned off and the display disappears, it
MP-OFF."
cannot be operated with the card remote
(6): PAUSE* 9
commander unless (SOURCE) on the unit is
pressed, or a disc is inserted to activate the unit first.
To pause playback. To cancel, press
again.
Tip
Radio:
For details on how to replace the battery, see
To receive stored stations (press); store
"Replacing the lithium battery of the card remote
commander" on page 15.
stations (press and hold).
About USB cap
O SCRL (scroll) button 8, 9
When not using the USB terminal ( F ), use the
To scroll the display item.
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
P RESET button 4
prevent accidental swallowing.
Q Z (eject) button 5
To eject the disc.
R Disc slot 5
To insert the disc.
H EQ3 (equalizer) button 10
The following buttons on the card remote
commander have also different buttons/functions
To select an equalizer type (XPLOD,
from the unit. Remove the insulation film before
VOCAL, EDGE, CRUISE, SPACE,
use (page 4).
GRAVITY, CUSTOM or OFF).
w; < (.)/, (>) buttons
I Receptor for the card remote
commander
J SEEK –/+ buttons
wa VOL (volume) +/– button
CD/MD* 1 /USB* 2 :
To skip tracks (press); skip tracks
continuously (press, then press again within
ws ATT (attenuate) button
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
wd SEL (select) button
To tune in stations automatically (press); find
a station manually (press and hold).
K BTM button 8
wf M (+)/m (–) buttons
To start the BTM function (press and hold).
L MODE button 8, 10, 12
wg Number buttons
To select the radio band (FM/AM); select the
unit* 3 ; select the play mode* 4 .
M DSPL (display) button 8, 9
*1 When an MD changer is connected.
To change display items.
*2 When a USB device is connected.
N Frequency select switch (located on the
*3 When a CD/MD changer is connected.
bottom of the unit) *4 When an ATRAC Audio Device is connected.
*5 When an ATRAC CD is played.
See "Frequency select switch" in the
*6 When an MP3/WMA/AAC is played.
supplied installation/connections manual.
*7 If the changer/USB is connected, the operation is
O Number buttons
*8 When playing back on this unit and a USB device.
CD/MD* 1 /USB* 2 :
(1)/(2): GP* 5 /ALBM* 6 –/+ Notes
• When ejecting/inserting a disc, keep any USB
To skip albums (press); skip albums
devices disconnected to avoid damage to the disc.
continuously (press and hold).* 7
• If the unit is turned off and the display disappears, it
(3): REP 8, 10, 12
cannot be operated with the card remote
(4): SHUF 8, 10, 12
commander unless (SOURCE) on the unit is
(5): BBE MP* 2
8
pressed, or a disc is inserted to activate the unit first.
To activate the BBE MP function, set
Tip
"BBE MP-ON." To cancel, set "BBE
For details on how to replace the battery, see
MP-OFF."
"Replacing the lithium battery of the card remote
(6): PAUSE*
8
commander" on page 15.
To pause playback. To cancel, press
About USB cap
again.
When not using the USB terminal ( F ), use the
Radio:
supplied USB cap to prevent dust or dirt entering.
To receive stored stations (press); store
Keep the USB cap out of the reach of children to
stations (press and hold).
prevent accidental swallowing.
P SCRL (scroll) button 8, 9
To scroll the display item.
Q RESET button 4
R Z (eject) button 5
To eject the disc.
S Disc slot 5
To insert the disc.
This section is extracted
from instruction manual.
To control CD/radio/MD/USB, the same as
(SEEK) –/+ on the unit.
To adjust volume.
To attenuate the sound. To cancel, press
again.
The same as the select button on the unit.
To control CD, the same as (1)/(2) (GP/
ALBM –/+) on the unit.
To receive stored stations (press); store
stations (press and hold).
different, see page 12.
7
To control CD/radio/MD/USB, the same as
(SEEK) –/+ on the unit.
To adjust volume.
To attenuate the sound. To cancel, press
again.
The same as the select button on the unit.
To control CD, the same as (1)/(2) (GP/
ALBM –/+) on the unit.
To receive stored stations (press); store
stations (press and hold).
different, see page 12.
7
5