Tidying Up the Connected Cables
1
1
Attach the cable guides to the groove on the back of
the monitor.
3
1
Connect the cables to the corresponding ports.
5
1
Push the cables into the grooves to tidy them up.
7
1
Connect the cables to One Connect.
x 2
2
1
Raise the stand neck to its full height, and then rotate the
monitor clockwise to switch it to landscape mode.
4
1
Insert the cable holder into the hole to fix the cables.
6
1
Pass the cables through the cable guides to tidy them up.
8
1
Close the rear cover to finish the process.
- 23 -