Start-Up; Communications Options For Ec Fan Programming - Woods AC Manual

Table of Contents

Advertisement

6. START-UP

Before first-time start-up check the following:
-
Installation and electrical connection have been properly completed?
-
Electrical connection carried out in accordance with wiring diagram
-
Turning diagram corresponds to turning direction arrow on fan housing. The airflow direction or turning
direction determines the functionality of the fan, not the motor rotation field.
-
Is the protective earth connected?
-
Connection data complies with the specifications on the type plate.
-
Motor operating capacitor data complies with the specification of the type plate (1 ph).
-
Safety equipment is in place.
-
Temperature monitor/motor protection switch are professionally connected and operating properly.
-
All leftover installation materials and other foreign materials have been removed from the fan cavity.
-
Cable gland is sealed.
-
Do the installation position and the arrangement of the condensation drain holes in the motor corresponds
to each other (does not apply to protection class IP55 fans).
The designated use of Woods Plate fans with VDE certification assumes connection in a device or via a control
unit.
Start-up may only begin when all safety instructions have been verified and any hazards have been ruled out.
Check for low vibration operation, strong vibration due to erratic operation (unbalanced), e.g. caused by
transportation damage or improper use, can lead to failure.

7. COMMUNICATIONS OPTIONS FOR EC FAN PROGRAMMING

Depending on the connection version and the auxiliary modules installed, there are different options for
communicating with the EC fan motor.
With the ECBlue Basic connection version, the "AM-MODBUS-WB" auxiliary module provides an additional
option for programming using a mobile app.
The MODBUS interface in the ECBlue BASIC-MODBUS connection version and the ECBlue Basic with AM-
MODBUS auxiliary module enables programming using the A-G-24NW hand-held terminal or a PC software.
For detailed information on installation and operation, please contact Woods Air Movement.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ec

Table of Contents