Table of Contents
Advertisement
5.1 Every day
Wash off the turn plate with a cleaning agent suitable for Aluminum and stainless steel. Follow
instructions on the bottle or can. Wipe off the turn plate. Do not use high-pressure flushing, which
is liable to damage both the electronics and the chassis
5.2 Every month, or as needed
Check that no abnormal noises have arisen in the motor and gear.
1. Electrical connections: check all connections and deal with any damage or wear. If necessary,
replace with new parts.
2. Screws and nuts: check that all screws and nuts have been made tight.
3. Labels: check that the labels are secure and fully legible. They are there for your safety.
5.3 Sign and decals
Check that the following signs and decals are attached and are fully legible.
Sign/decal
Unit designation
Instruction decal
5.4 Troubleshooting
The Turn device is designed for safe and effective operation on condition that the routine
maintenance is looked after in accordance with instructions. Should any problem arise, advice on
what to do is to be found in the trouble-shooting list below.
If the problem persists after this, contact a serviceman or Pronomic AB.
Description
Decal with serial number
Decal instructing the
operator
Placement
One decal on the control box
and one decal on the
attachment
Front of the control box
4
Advertisement
Table of Contents
