Gas Connections - BRABURA Griddle L CLASS 40 Instruction Manual

Gas
Table of Contents

Advertisement

GAS CONNECTIONS

Gas Requirements
The BRABURA Griddle is certified according to the UNE-EN 498: 2012 standard.
Before installation ensure that the conditions for local distribution (gas type and gas pressure) and the setting of the appliance are compatible. The rating plate is located on the rear of the chassis reports
of the codes of all European Countries where the appliance can be operated.
The recall of the gas to be used is indicated on the packaging and on the rating plate of the BRABURA Griddle. The unit has been factory set for use with 28-30/37mbar butane/propane gas in bottle.
FOR OUTDOOR USE ONLY. IF STORED INDOORS, DETACH AND LEAVE CYLINDER OUTDOORS.
MANUFACTURED BY:
1. READ INSTRUCTIONS BEFORE LIGHTING.
2. OPEN LID DURING LIGHTING AND DO NOT CLOSE WHILE IN USE.
3. IF IGNITION DOES NOT OCCUR IN 5 SECONDS, TURN THE BURNER CONTROL(S) OFF,
WAIT 5 MINUTES, AND REPEAT THE LIGHTING PROCEDURE.
- DO NOT USE THIS APPLIANCE UNDER OVERHEAD COMBUSTIBLE MATERIALS.
- TURN OFF LP SUPPLY AT CYLINDER WHEN APPLIANCE IS NOT IN USE.
- THIS APPLIANCE IS NOT INTENDED FOR COMMERCIAL USE.
ONLY FOR INSTALLATION IN BUILT-IN ENCLOSURE CONSTRUCTED OF NON-COMBUSTIBLE MATERIAL. FOR
INSTALLATION IN A BUILT-IN ENCLOSURE CONSTRUCTED OF COMBUSTIBLE MATERIALS WHEN INSTALLED WITH
MONSALUD 23,
INSULATING JACKET.
VILLAFRANCA DE LOS BARROS 06220 - SPAIN
Read the instructions before using the appliance. WARNING: accessible parts may be very hot. Keep young children away
COUNTRY OF DESTINATION
CATEGORY/IES
BG - CY - DK - EE - FI - HR - HU - IT - IS - LT
I3B/P
LU - MT - NL - NO - RO - SE - SI - TR
BE - CY - CZ - ES - FR - GB - GR
I3+
IE - IT - LT - LU - PT - SI
AT - DE - CH
I3B/P
PL
I3B/P
Model No: BGG 0001 (Brabura 40'' GRIDDLE)
18
TYPE OF GAS
SUPPLY PRESSURE
POWER
G30/G31
30 mbar
12.8 kW (G30: 931g/h; G31: 915g/h)
G30/G31
28-30 / 37 mbar
12.8 kW (G30: 931g/h; G31: 915g/h)
G30/G31
50 mbar
12.8 kW (G30: 931g/h; G31: 915g/h)
G30/G31
37 mbar
12.8 kW (G30: 931g/h; G31: 915g/h)
SERIAL NUMBER: G4022xxxx
22
0051
ORIFICE SIZE
0.88
0.88
0.78
0.82
* Example image: BRABURA L CLASS 40''
G G E D 0 0 | b r a b u r a g r i d d l e . c o m

Advertisement

Table of Contents
loading

This manual is also suitable for:

L class 30L class 20Bgg0001Bgg0002Bgg0003

Table of Contents