Table of Contents
Advertisement
LIGHTING INSTRUCTIONS
The BRABURA griddle is equipped with a thermocouple and safety valve system which monitors the
burner. This will turn the gas off if the burner is not lit.
1.
Open the lid and remove any cooking utensils. Ensure the grease tray is in place and all the
knobs are on the OFF position.
2.
Connect the hose regulator to gas cylinder (see 'gas connection'), hose regulator to griddle
manifold. Turn the gas supply ON at the cylinder. Check with the use of soapy water (see 'leak
testing') for any gas leakage between the bottle and hose regulator.
3.
Push in and hold the selected dial for 2 seconds before turning to High. Hold for 10 seconds to
light the griddle.
12
4.
If burner does not light after several attempts turn the dial to OFF, wait 5 minutes and repeat
step 3. If the burners do not stay alight, repeat step 3 and 4.
5.
Adjust the heat by turning the knob to the high/low position.
6.
To turn the BRABURA Griddle off turn the cylinder valve to the off position and then turn all the
control knobs on the appliance clockwise to the off position.
* Example image: BRABURA L CLASS 40''
G G E D 0 0 | b r a b u r a g r i d d l e . c o m
Advertisement
Table of Contents
