Page 1
- Second Edition - This document is the exclusive instruction manual to the vapor temperature indicator TA300 model installed on the RE300 model rotary evaporator. Please use this document together with the instruction manual of the rotary evaporator as for the operating instructions of device.
Installation Contents in the Package Please check the contents in the package before installing the TA300 to the rotary evaporator. Please contact our selling office or sales office if any components or parts are missing. Contents Name Notes Vapor temperature indicator TA300...
Page 5
Installation Installation Method 2) TA300 connection Connect the DC24V power cable to the RE main unit. Connect the vapor temperature sensor to the condenser. Hose piping is not required. TA300 To back surface of RE main unit Temperature sensor To connector on the back...
Operation Method 1) Turn on the power of RE main unit and start operation. 2) Turn on the power switch of operation panel on the TA300. The screen displays the current evaporating temperature by in increments of 0.1℃. Temperature display screen...
Handling Precautions WARNING! Substances that cannot be used Never use explosive substances, flammable substances and substances that include explosive or flammable ingredients in this unit. Explosion or fire may occur. (Refer to page 12 "List of Dangerous Substances".) If a problem occurs If smoke or strange odor should come out of this unit for some reason, turn off the power switch right away, and then disconnect the power cord.
Long storage and disposal When not using this unit for long term / When disposing CAUTION! When not using this unit for long term… • Turn off the power and disconnect the power cord. WARNING! When disposing… • Keep out of reach of children. Environmental protection should be considered We request you to disassemble this unit as possible and recycle the reusable parts considering to the environmental protection.
• Check if a power failure occurs. In the case if the error other than listed above occurred, turn off the power and disconnect the power cord immediately. Contact the shop of your purchase or nearest Yamato Scientific Service Office.
In Case of Request for Repair If the failure occurs, stop the operation, turn OFF the power switch, and unplug the power plug. Please contact the sales agency that this unit was purchased, or the Yamato Scientific's sales office. < Check following items before contact >...
Specification Product name Vapor temperature indicator Model TA300 Supported models RE300 Power switch Push-button Configuration Display unit Digital LED display Vapor temperature sensor Pt100Ω glass tube coating, resin nut attached Display part LED display Outer covering ABS resin coating Performance...
Part Name Code No. Specification Manufacturer Power switch LT00015364 AB6M-A1B Izumi Denki Temperature display unit LT00015091 TTM-004 DC24V Toho Denshi Vapor temperature sensor LT00015090 Pt100Ω Yamato Scientific Sensor cap LT00015054 Duracon Yamato Scientific Sensor packing LT00015054 Silicon rubber Yamato Scientific...
Reference List of Dangerous Substances Never use explosive substances, flammable substances and substances that include explosive or flammable ingredients in this unit. EXPLOSIVE Ethylene glycol dinitrate (nitro glycol), Glycerin trinitrate (nitroglycerine), Cellulose nitrate (nitrocellulose), and other explosive nitrate esters Trinitrobenzene, Trinitrotoluene, Trinitrophenol (picric acid), and other explosive EXPLOSIVE: nitro compounds Acetyl hidroperoxide (peracetic acid), Methyl ethyl ketone peroxide, Benzyl...
* Install the unit according the procedure described below (check special specifications separately). Person in charge of installation Person in charge of Model Serial number Date Judgment (company name) installation TA300 № Item Method Reference operation manual Judgment Specifications Check the quantities of accessories with Accessories the quantities shown in the Accessory P.10...
Page 16
Responsibility Please follow the instructions in this document when using this unit. Yamato Scientific has no responsibility for the accidents or breakdown of device if it is used with a failure to comply. Never conduct what this document forbids. Unexpected accidents or breakdown may result in.