Advertisement
V
ECTOR
13. Now you can select the operating mode of the next switching event if
needed by pressing the ( ) ( ) button:
no
= Switching event not used
OFF
= Operating mode changes to off mode
ECO = Operating mode changes to unoccupied (economy) mode
ON
= Operating mode changes to occupied (comfort) mode
UNI
= Operating mode does not change
➔ 2 bars indicate setting of switching event 2 of 4 is executed.
Note: Not used switching events should be set to "no".
14. Press the (
/
15. Press the ( ) ( ) button to adjust the time the switching event will
execute from 00:00...23:45 in 15 minutes steps.
➔ 2 bars indicate setting of switching event 2 of 4 is executed.
16. Press the (
/
17. Now you can select the operating mode of the next switching event if
needed by pressing the ( ) ( ) button.
...
To go back to the previous submenu/menu, press the (
Doc: 70-00-0988A, 20220920
Subjects to alteration
O
PERATIONS
) button to save.
) button to save.
© Vector Controls GmbH, Switzerland
www.vectorcontrols.com
M
T
P
ANUAL
IME
ROGRAMING FOR
...
) button.
TCY-BH
Page 5-6
Advertisement
