Table of Contents
Advertisement
Quick Links
V
ECTOR
Operating instructions Time Programing
1
Overview
The following instructions describe how to set the clock and how to program the time programs of the TCY-BH for daily,
weekly repeated action/function.
These operating instructions apply to devices that support time schedules that is devices with an integrated real-time
clock.
For additional information, refer to the TCY-BH operating instructions.
2
Display and Operation
2.1 User Interface
Figure 1: TCY-BH
Button
Function
Symbol
Operating mode
(Back)
Right
(Confirm)
Up
(+)
Down
(-)
Doc: 70-00-0988A, 20220920
Subjects to alteration
O
PERATIONS
Figure 2: TCY-BH-U
Description
Operating mode selection (On / Off, Occupied / Unoccupied mode)
Menu navigation: Back to the previous menu
Long press: Off if occupation mode is configured
Menu navigation: Next menu point
Alarms: Confirm the alarm
Adjust temperature set points and control parameters
Adjust temperature set points and control parameters
© Vector Controls GmbH, Switzerland
www.vectorcontrols.com
M
T
P
ANUAL
IME
ROGRAMING FOR
TCY-BH
Page 1-6
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vector TCY-BH
Summary of Contents for Vector TCY-BH
- Page 1 Operating instructions Time Programing Overview The following instructions describe how to set the clock and how to program the time programs of the TCY-BH for daily, weekly repeated action/function. These operating instructions apply to devices that support time schedules that is devices with an integrated real-time clock.
- Page 2 Set clock, change time schedules or indication of set time schedules Schedules The side bars show the fan speed. 2.5 Operation Status Display Status Description Alarm Alarm / Error active. Doc: 70-00-0988A, 20220920 © Vector Controls GmbH, Switzerland Page 2-6 Subjects to alteration www.vectorcontrols.com...
- Page 3 This section gives an overview of the clock and the available timed functions of the device. Note on Accuracy Warning: Devices with a "D" addition (e.g. TCY-BH-D) have a real-time clock. This clock is accurate to two seconds a day.
- Page 4 00:00…23:45 in 15 minutes steps. ➔ 1 bar indicate setting of switching event 1 of 4 is executed. 12. Press the ( ) button to save. Doc: 70-00-0988A, 20220920 © Vector Controls GmbH, Switzerland Page 4-6 Subjects to alteration www.vectorcontrols.com...
- Page 5 17. Now you can select the operating mode of the next switching event if … needed by pressing the ( ) ( ) button. … To go back to the previous submenu/menu, press the ( ) button. Doc: 70-00-0988A, 20220920 © Vector Controls GmbH, Switzerland Page 5-6 Subjects to alteration www.vectorcontrols.com...
- Page 6 ECTOR TCY-BH PERATIONS ANUAL ROGRAMING FOR Smart Sensors and Controls Made Easy! Quality - Innovation – Partnership Vector Controls GmbH Switzerland info@vectorcontrols.com www.vectorcontrols.com Doc: 70-00-0988A, 20220920 © Vector Controls GmbH, Switzerland Page 6-6 Subjects to alteration www.vectorcontrols.com...
Need help?
Do you have a question about the TCY-BH and is the answer not in the manual?
Questions and answers